Paint a piece of furniture It is one of the best ways to renew your appearance and be practically new. However, many times we do not know how to use paint. That is why today in Facades World We will share the most common mistakes made when painting. Take note because we are starting right now!
When painting a piece of furniture do not be in a hurry
One of the most common mistakes is doing things quickly. Usually we go wrong in life and for paint a piece of furniture It is not the most recommended since we must do it calmly and with dedication. If we see that we are not going to be able to do it today, it is better to leave it for tomorrow or another day where we are calmer. This is recommended because when painting it is very important to respect the drying times between coats. So, if you don't have time, better another calmer day.
Not using the right materials to paint a piece of furniture
In general, when renovating a piece of furniture by painting it, we are saving a lot of money since we do not have to buy a new one that would be more expensive. That is why we tell you, when buying a painting you do not want to save, buy a good quality painting. We say this because if you don't it will show in the final result. Generally, in the paint shops we find many people who can advise us in the best way, we must listen to them.
Not following the manufacturer's instructions
If we are not expert painters that we know all the paintings that have been and for having it it is better that we follow the instructions of the manufacturers that are detailed in the paint containers. In this way we will avoid many headaches since we will know how to prepare it if necessary or how to use it.
Not preparing the furniture well that we are going to paint
This is usually one of the most common mistakes since we start painting quickly without any treatment. In Facades World we say NO! The first thing we must do is check the furniture to see if it has any damage, once we check that the furniture is suitable we must clean it thoroughly. If our furniture has traces of paint we must proceed to sand it until the wood is clean of residues.
Not preparing the environment to avoid stains
Many times when we start painting we do not have the precaution of preparing the work area. This error often brings us a lot of headaches since by not working a little more in the preparation of the terrain we end up working more later. If we do not cover the surface where we are going to paint, we will stain the floor, therefore we will have to clean the stains once our work is finished. For this it is advisable to use newspapers, an old blanket or even plastic. Any resource is valid to cover the surface that we will use when painting our furniture.
Don't apply too much paint
Once the furniture is prepared and ready, what we must do is paint it with a suitable brush or with a roller if the surface is smooth. For this we must mix our paint well to encourage the pigments to mix properly. A mistake that we often make is overloading our brush with paint too much, which causes brush marks on our furniture and even stains on it. From our website We recommend that you drain the brush well before applying the paint.
Not protect the surface
One mistake we often make is not applying a product to the surface that protects our work. For this we have to choose wax or varnish, which we will choose depending on the result we want to achieve. Wax is very delicate and is recommended for furniture that does not have as much traffic. Varnish is often used on furniture that has a lot of use since it is very resistant.
At Facades World We are again very grateful to our colleagues from Architecture Planet for sharing this informative article with our entire community. Do not hesitate to visit their website to find out the latest architectural news and much more.